射电望远镜主动面促动器的电磁辐射分析

主动面控制技术是当前大口径、高精度射电望远镜广泛使用的主动补偿技术,其包含的促动器在补偿面形精度的同时也辐射电磁波并影响射电天文观测。文中结合目前研究现状,对极低电磁辐射要求下的促动器进行辐射源分析,重点针对促动器控制板上信号建立数学模型,并选取晶振回路计算,合理设定印制板及器件的参数,通过Ansys 软件进行频域有限元分析,得到控制板晶振回路的辐射结果和规律。用近场测试验证了文中方法的有效性。该研究为促动器控制板的电磁兼容优化设计提供了验证方法,为降低主动面控制系统的电磁辐射奠定了基础。     

频率可调太赫兹回旋振荡管互作用电路的设计与研究

根据动态核极化核磁共振成像技术对回旋振荡管的要求,设计了130 GHz 回旋振荡管的注波互作用电路,基于线性理论对互作用电路进行了研究并选择了合适的工作点,分析了电路的频率调节特性。利用相对论电子回旋脉塞非线性理论对互作用系统进行了模拟和计算,优化了工作参数,计算了磁场及电子注参数对输出功率及效率的影响。最后,用粒子模拟方法进行了模拟并与非线性理论结果进行了比较,两者符合得很好。模拟结果显示,当电压为10 kV、电流为0.3 A、磁场强度由2.34 T 增加到2.41 T 时,输出功率由1310 W 减小到230 W,对应的效率分别为43.6%和7.7%,振荡管的频率可调范围约为2.7 GHz。     

雷达发射机浮动板调制器与故障检测电路的设计

提出了一种改进的浮动板调制器和对正负偏电压的故障检测电路,利用MOSFET寄生电容特性,通过固定脉宽窄脉冲控制调制脉宽,通过增加负偏MOSFET提高输出负偏电压。对故障检测电路进行仿真实验,通过模拟故障,验证故障检测报警信号发生时间均在微秒级别。完成样机的搭建,利用多重方式解决高压绝缘问题,并对其加电进行试验验证,分析实验波形,证明此电路满足设计要求并且具有可行性。     

露天采场高陡边坡下深部采空区的爆破处理研究

鞍本地区是我国最大的BIF型铁矿集中分布区,其铁矿资源量/储量约占全国总量的1/4,但由于日伪时期的掠夺式开采和矿业整合开发前的无序开发利用,在一定深度空间内遗留了大量隐伏采空区,为后期实现规模化露天开采带来极大的安全隐患,成为制约露天铁矿资源安全高效开采的难题。以弓长岭露天铁矿大砬子采区高陡边坡下的深部采空区为研究对象,利用LS_DYNA软件进行采空区的安全爆破模拟研究,结合现场深部采空区爆破参数试验结果,提出了采用孔中起爆处理采空区的方法,具体参数设置为空区预留顶板厚度3 m,孔间延期时间42 ms,排间延期时间75 ms,平均炸药单耗0.237 kg/t。在上述分析的基础上,针对大砬子露天采场高陡边坡内的深部不规则多层采空区提出了分层、分区安全爆破处理的技术方案,且空区边界用切割爆破方法处理,爆破处理效果良好,采空区得到了安全有效治理。     

Analysis of Cerebrospinal Fluid Extracellular Vesicles by Proximity Extension Assay: A Comparative Study of Four Isolation Kits

There is a lack of reliable biomarkers for disorders of the central nervous system (CNS), and diagnostics still heavily rely on symptoms that are both subjective and difficult to quantify. The cerebrospinal fluid (CSF) is a promising source of biomarkers due to its close connection to the CNS. Extracellular vesicles are actively secreted by cells, and proteomic analysis of CSF extracellular vesicles (EVs) and their molecular composition likely reflects changes in the CNS to a higher extent compared with total CSF, especially in the case of neuroinflammation, which could increase blood–brain barrier permeability and cause an influx of plasma proteins into the CSF. We used proximity extension assay for proteomic analysis due to its high sensitivity. We believe that this methodology could be useful for de novo biomarker discovery for several CNS diseases. We compared four commercially available kits for EV isolation: MagCapture and ExoIntact (based on magnetic beads), EVSecond L70 (size-exclusion chromatography), and exoEasy (membrane affinity). The isolated EVs were characterized by nanoparticle tracking analysis, ELISA (CD63, CD81 and albumin), and proximity extension assay (PEA) using two different panels, each consisting of 92 markers. The exoEasy samples did not pass the built-in quality controls and were excluded from downstream analysis. The number of detectable proteins in the ExoIntact samples was considerably higher (~150% for the cardiovascular III panel and ~320% for the cell regulation panel) compared with other groups. ExoIntact also showed the highest intersample correlation with an average Pearson’s correlation coefficient of 0.991 compared with 0.985 and 0.927 for MagCapture and EVSecond, respectively. The median coefficient of variation was 5%, 8%, and 22% for ExoIntact, MagCapture, and EVSecond, respectively. Comparing total CSF and ExoIntact samples revealed 70 differentially expressed proteins in the cardiovascular III panel and 17 in the cell regulation panel. To our knowledge, this is the first time that CSF EVs were analyzed by PEA. In conclusion, analysis of CSF EVs by PEA is feasible, and different isolation kits give distinct results, with ExoIntact showing the highest number of identified proteins with the lowest variability.     

复合固体推进剂中固体填料的安息角测试与仿真

复合固体推进剂含有固体颗粒较多，离散单元法是一种适合固体推进剂生产过程数值仿真的有效方法，颗粒物料的接触参数是保证离散单元法仿真精度的关键。本文以复合固体推进剂的主要组分铝粉和高氯酸铵固体颗粒为研究对象，通过实验测试获得了相关物料的安息角，利用专业离散元软件EDEM仿真模拟了安息角测试实验过程，建立了物料安息角与接触参数之间的联系。研究表明，滚动摩擦系数和滑动摩擦系数越大，安息角越大，物料流动性越差。对比仿真与实验结果，通过逆向反推法确定了物料的滑动摩擦系数和滚动摩擦系数两个关键接触参数。铝粉与高氯酸铵1∶2混合颗粒的滑动摩擦系数为0.2，滚动摩擦系数为0.05。为固体推进剂加工生产过程离散元数值仿真提供了关键基础数据。     

液压阻尼孔的宽温度范围流动特性试验研究

研制一种适合对各种液压孔口或缝隙进行高低温流体力学试验的新型试验装置，运用该装置对具有不同几何参数的液压阻尼孔进行在-50~80℃宽温度范围内的流动特性试验，研究以普通抗磨液压油HM46和低温抗凝减振器油TITAN SAF 5045为工质及其温度变化时对液压阻尼孔流量-压力特性曲线、幂指数和流量系数的影响，研究表明，在低温条件下，液压阻尼孔的流量系数均因油液黏度增大、流动性变差而呈线性下降的趋势，从宏观上看，HM46通过液压阻尼孔时的流动稳定性较差，其对应流量系数的下降幅度明显大于TITAN SAF 5045对应的下降幅度，厚壁小孔流量系数的下降幅度明显大于薄壁小孔对应的下降幅度。研究所获得的新型试验装置、试验数据分析方法和具体理论公式为深入研究和优化现代液压元件在宽温度范围内的动态性能提供新型试验平台与理论基础。     

贾燕1,赵永涛2,张红松2

为确定ZrO2/莫来石热障涂层的单层最佳厚度,采用有限元技术研究单层厚度对ZrO2/莫来石热障涂层热冲击应力的影响。结果表明,莫来石层厚度为0.25mm时,涂层表面及ZrO2/莫来石界面处具有最大热应力,而其它莫来石层厚度时涂层内部热应力则受莫来石层厚度影响不明显。当ZrO2层厚度为0.3mm时,ZrO2/莫来石涂层中的热应力在整个横向距离范围内保持稳定,而其它情况下涂层中的热应力则与ZrO2层厚度成正比。涂层表面处的径向热应力大于ZrO2/莫来石界面处的对应值。     

基于Flow-3D的高速水流无压溢洪洞内消能工数值模拟

针对目前高速水流消能形式存在的缺点,基于Flow-3D软件,采用RNGκ-ε模型、Tru-VOF法模拟了无压洞式溢洪道内消能墩附近的水流运动特性,结合洞塞式消能工的消能机理和水工模型试验,对比分析了内消能墩附近的水流流态、流速分布、压强分布、水面线和消能率等。结果表明,在控制断面束窄度的条件下,消能墩附近流态不会影响洞内安全,消能效果较好,消能墩对墩后水流影响距离较短,为在洞内设置多组消能墩提供了依据。研究成果可为类似工程提供参考。     

Soret and Dufour effects between two rectangular plane walls with heat source/sink

This study addresses the thermo‐diffusion and the diffusion‐thermo phenomena in a semi‐infinite absorbent channel whose walls are contracting/expanding, with heat source/sink effects. The governing partial differential equations with suitable boundary conditions are transformed to a system of dimensionless ordinary differential equations. An analytic solution of the problem has been found using a technique called homotopy analysis method (HAM). HAM gives consistently valid answers to the problem over an extensive variety of parameters and also provides better accuracy. To validate the analytical results, a comparison has been presented with a numerical solution calculated by using the parallel shooting method. The effects of dimensionless parameters, that is, deformation parameter, Reynolds number, Soret and Dufour numbers, and heat source/sink parameter on the expressions of velocity, temperature, and concentration profiles are analyzed graphically to understand the physics of the deformable channel. It has been noted that the velocity across the channel is higher for the expanding channel, as compared to that for the contracting channel. Also the Soret and Dufour number increases the temperature of the fluid, and decreases the concentration. The temperature profile has an increasing behavior in the case of heat source, and a decreasing behavior in the case of heat sink.